Fan bearing the reason of abnormal temperature rise has three types:poor lubrication,cooling,bearing abnormal enough.
Centrifugal fan in the fan bearing,if appear desquamate,hemp pit,due to the bearing fatigue wear gap caused by temperature increase,can generally be by listening to bearing noise and vibration measurement to judge;If the cause of the poor lubrication,cooling is not enough,sasy to judge.And axial flow fan bearing concentration within the bearing box and placed in the inlet chamber below.When the bearing temperature occurs,because the fan running,is difficult to judge bearing has aproblem or lubrication,cooling problem.Practice,we should solve the following several aspects:
- Come on if appropriate.Should be in accordance with the requirements for bearing box to work on a regular basis.Sometimes also can appear after bearing oiling the condition of high temperature.Mainly oil too much,when the temperature rising contionously,at some point(generally higher than the normal operating temperature 10℃ to 15℃),will remain unchanged,and then gradually decline.
- Cooling fan,cooling air flow is insufficient,axial flow fan in the flue gas temperature an 120℃ to 240 ℃,bearing box if there is no effective cooliing,bearing temperature rise.Simple and auxiliary power saving solution is set up in lateral wheel hub bearing compressed air cooling.When temperature is low can not open compressed air cooling,conversely,open the compressed air cooling at high temperature.After confirm there is no the problem,check the bearing box again.